Vinyl is an increasingly popular choice among homeowners for flooring material. Vinyl is slip-resistant, easy to clean, and waterproof, making it a perfect option for flooring, especially in the kitchen bathroom and other areas with high footfall. When you plan to get a heated floor system installed, you need to be sure about the flooring material you are pairing up with it. The flooring material should be a good conductor of heat so that the heating system can effectively warm up the house or the room.

The radiant heating system and vinyl flooring are a good match. The flooring experts have carried out various tests to study the impact of the heating system on the physical and aesthetic aspects of the vinyl flooring. The tests indicated that the heating system neither caused any shrinkage nor impacted the appearance of the vinyl. Hence, proving that the heating system has no impact on the vinyl flooring. To help you make the best of the heating system and vinyl flooring, we have listed certain things you should keep in mind.

Adhere to the temperature restrictions

Though the underfloor heating system has no impact on the vinyl floor, certain temperature restrictions should be kept in mind. The temperature should never exceed 27 degrees Celcius. You can use a thermostat that helps you ensure that the temperature doesn’t exceed 27 degrees. When installing an underfloor heating system and having vinyl flooring, you should attach a thermostat. There are specially designed thermostats to be used with such floors. While buying the thermostat, your main focus should be on saving on the energy bill. You could get a smart thermostat that will help you to save money in the longer run.

Opting for the right kind of underfloor heating system

The wet underfloor heating system is installed on the structural level of the sub-floor. All the products used within the wet system range can be easily used along with laminate and vinyl flooring. Based on your choice, you can decide on an electric underfloor heating option. You can opt for an inscreed and foil cable electric underfloor heating system with vinyl flooring. It is highly recommended that you use an insulated dual overlay and underlay. This will help you to achieve maximum energy efficiency and allow you to heat your home effectively.

Choosing the right heating system

While you are deciding on the heating system, you need to decide which option will offer you enough heat output and make your room warm and comfortable. Before you opt for a heating system, you should carry out an accurate heat loss calculation. To get the best out of the heating system, you should make sure that everything above the ground must be within the recommended limits. The tog should exceed 2.5, U-value shouldn’t be below 4.0, and the RSI must not exceed 0.25. If these requirements are not met then the entire system would be negatively impacted and won’t be efficient.

Comments are closed.